EDID.tv

Data Display AG

SKS 1080p (S/N: 0)

Update Revisions Download binary

General Information

EDID version 1.3
Maximum resolution [email protected]
Video input Digital
Manufacturing Week 31 of 2013

Basic Display Parameters

Display gamma 2.20
Maximum horizontal image size 102 cm
Maximum vertical image size 57 cm
Signal level input Digital
VESA DFP 1.x
Display Type Monochrome or grayscale display

Feature Support

Active-off
Preferred Timing Mode
Standard sRGB
Standby
Suspend
Default GTF

Chromaticity

Color X Y
Red 0.640 0.330
Green 0.300 0.600
Blue 0.150 0.060
White 0.312 0.329

Established Timings

Horizontal Active Vertical Active Refresh Rate

Detailed Timings 1

Pixel clock 138500 kHz
Refresh rate 61.56 Hz
Horizontal Active 1920 pixels
Horizontal Blanking 105 pixels
Horizontal Sync Offset 48 lines
Horizontal Sync Pulse Width 32 lines
Horizontal Image Size 1020 mm
Horizontal Border 0 pixels
Vertical Active 1080 pixels
Vertical Blanking 31 pixels
Vertical Sync Offset 3 lines
Vertical Sync Pulse Width 3 lines
Vertical Image Size 570 mm
Vertical Border 0 pixels
Interlaced
Stereo Mode Normal display, no stereo.
Sync Scheme Digital Separate
Horizontal Polarity
Vertical Polarity

Detailed Timings 2

Pixel clock 57940 kHz
Refresh rate 58.79 Hz
Horizontal Active 1280 pixels
Horizontal Blanking 50 pixels
Horizontal Sync Offset 8 lines
Horizontal Sync Pulse Width 32 lines
Horizontal Image Size 1020 mm
Horizontal Border 0 pixels
Vertical Active 720 pixels
Vertical Blanking 21 pixels
Vertical Sync Offset 7 lines
Vertical Sync Pulse Width 8 lines
Vertical Image Size 570 mm
Vertical Border 0 pixels
Interlaced
Stereo Mode Normal display, no stereo.
Sync Scheme Digital Separate
Horizontal Polarity
Vertical Polarity

Monitor Range Limits

Minimum horizontal line rate 15 kHz
Maximum horizontal line rate 95 kHz
Minimum vertical line rate 49 Hz
Maximum vertical line rate 154 Hz
Maximum pixel clock rate 160.00 MHz
Secondary GTF curve supported
Coordinated Video Timings supported

Comments

No comments

Logging Required

Only users can post comments.